Recent Discussions

The diameter of the bullet casing, measured at 7.3 mm, is 7.3 millimeters. The .308 has a larger DIAMETER bullet, being 7.62 mm (versus7mm) However, SOME 7mm cartridges may be longer than the .308, suchas the 7mm Magnum. Anywhere from $100 to a few thousand- depends on which 7mmrifle- and which 7mm cartridge- there ARE several differentone.

Convert 23Cm to inches?

Shotguns use an entirely different system known asgauge. To convert 1400 mm x 700 mm to feet and inches, first, convert millimeters to inches by dividing by 25.4. This gives approximately 55.12 inches for 1400 mm and about 27.56 inches for 700 mm. Converting these to feet and inches, 1400 mm is roughly 4 feet 7 inches, and 700 mm is about 2 feet 3.5 inches.

Which conversion factor can be used to find the number of feet in 315 inches?

To convert millimeters to thousandths of an inch, you can use the conversion factor that 1 millimeter is approximately 39.37 thousandths of an inch. Therefore, 0.1 mm is equal to 0.1 mm × 39.37 thousandths/mm, which is approximately 3.937 thousandths of an inch. The caliber of a bullet, refers to it’s diameter in inches. Butsometimes other measurements are used, such as mm. If you are talking about a .45 acp The bullet diameter of .451equates to 11.5mm.

• Anywhere from $100 to a few thousand- depends on which 7mmrifle- and which 7mm cartridge- there ARE several differentone.
• Thus, the dimensions in feet and inches are approximately 4’7″ x 2’3.5″.
• This conversion reflects the standardized relationship between inches and metric measurements.
• In older metric terms, it can also be approximated as 25.4 millimeters.
• To convert 1400 mm x 700 mm to feet and inches, first, convert millimeters to inches by dividing by 25.4.

How many millimeters in 7.1 centimeters?

If you are talking about a bullet used in riflecalibers (45-70) etc.then the bullet diameter of .457 equates to11.7mm. Using a linear metric system conversion table can help whenfiguring out how many feet are in 315 inches. Since there are 12inches in 1 foot, you would have to divide 315 by 12, and you wouldget 26.25 feet. The diamater of a 9mm parabellum bullet is 9.03 millimeters, or.356 of an inch.

• To visualize it, consider that 7 mm is slightly less than 0.3 inches, and 4 mm is just over 0.15 inches.
• Shotguns use an entirely different system known asgauge.
• When you divide millimeters by 25.4, you convert the measurement to inches.
• Therefore, 0.1 mm is equal to 0.1 mm × 39.37 thousandths/mm, which is approximately 3.937 thousandths of an inch.

How many inches is equal to 50NB?

When you divide millimeters by 25.4, you convert the measurement to inches. This conversion is commonly used to switch between the metric and imperial systems of measurement for length. One inch is equivalent to 2.54 centimeters in the metric system. In older metric terms, it can also htv3.7.1 be approximated as 25.4 millimeters.

This conversion reflects the standardized relationship between inches and metric measurements. This is the bore diameter given infractions of an inch, or in millimeters. A .30 caliber rifle isabout .30 inches in diameter.

Thus, the dimensions in feet and inches are approximately 4’7″ x 2’3.5″. A 7×4 mm measurement indicates an object that is 7 millimeters long and 4 millimeters wide. To visualize it, consider that 7 mm is slightly less than 0.3 inches, and 4 mm is just over 0.15 inches. This size is relatively small, comparable to the size of a small button or a piece of candy. To convert millimeters to thousandths of an inch, you can use the conversion factor where 1 mm equals approximately 39.37 thousandths of an inch. Therefore, 0.20 mm is approximately 7.874 thousandths of an inch.